Apprentice Fire Sprinkler Inspector

FSS Technologies

. Work alongside and under the direct supervision of a qualified FSS inspector .

Posted 9/21/2026full-timeRemote • Minnesota • United StatesEntry Level💰 $18 - $25 per hourWebsite

Core Competencies

Role fit

Core Competencies

Use this summary to align your resume positioning with the role.

Demonstrates proficiency in inspecting, testing, and maintaining water-based fire protection systems, including knowledge of NFPA 25 requirements and the ability to operate control valves and perform various system tests. Capable of accurately recording inspection results and communicating effectively with team members and customers.

Highest-signal resume keywords

Water-Based Fire Protection Systems InspectionNFPA 25 ComplianceControl Valve OperationBasic Math SkillsNICET Level I Certification

ATS Keywords

Tailor your resume

Applicant Tracking System Keywords

Tip: use these terms in your resume and cover letter to boost ATS matches.

Hard Skills

Fire Protection System TestingMechanical AptitudePressure Gauge ReadingSimple CalculationsLadder and Lift OperationMinor Maintenance and Corrective WorkInspection Result RecordingFire Pump TestingAntifreeze Concentration CheckingSystem Impairment Procedures

Soft Skills

Clear CommunicationCustomer ServiceTeam CollaborationAttention to DetailRespect for Property and Schedules

Tools & Technologies

SmartphoneTabletHand ToolsLaddersAerial LiftsScissor Lifts

Certifications & Qualifications

High School Diploma or GEDValid Driver’s LicenseOSHA 10-Hour Construction CertificationNICET Level I Certification

Industry Keywords

Fire Protection SystemsCommercial BuildingsIndustrial BuildingsMultifamily BuildingsFSS Safety ProgramOSHA RequirementsPre-Action Sprinkler SystemsDry Pipe Sprinkler SystemsWet Pipe Sprinkler SystemsFire Department Connections

About the role

Key responsibilities & impact

Work alongside and under the direct supervision of a qualified FSS inspector
Inspect, test, and maintain water-based fire protection systems in commercial, industrial, and multifamily buildings
Help inspect and test wet pipe, dry pipe, pre-action, deluge, and antifreeze sprinkler systems, standpipes, and fire pumps
Visually inspect sprinklers, piping, hangers, bracing, control valves, gauges, fire department connections, and signage
Help operate control valves and perform main drain, waterflow alarm, and valve supervisory switch tests
Help perform dry pipe valve trip tests, quick-opening device tests, air supply and low-air alarm checks, and fire pump tests
Check antifreeze concentration, spare sprinkler cabinets, gauge dates, and other NFPA 25 requirements
Perform minor maintenance and corrective work as directed by the supervising inspector
Confirm with building contacts and alarm monitoring companies that systems may be tested
Follow FSS impairment procedures when systems are taken out of service
Confirm systems are back in service, control valves are open and supervised, and relevant parties are notified before leaving sites
Treat customers, building occupants, and site staff courteously and respect property, schedules, and site rules
Accurately record inspection and test results in FSS forms or software, including photos of deficiencies
Report deficiencies to the supervising inspector the same day and immediately report conditions that could prevent system operation
Follow the FSS Safety Program, OSHA requirements, site-specific safety rules, and PPE requirements
Use ladders, lifts, and equipment only after receiving training and authorization
Immediately report injuries, near misses, property damage, and vehicle incidents
Safely drive a company vehicle between job sites in compliance with FSS policies
Complete assigned classroom, online, and on-the-job training and track training hours
Work toward NICET Level I certification and higher levels
Obtain and maintain any state-required apprentice or trainee registration

Requirements

What you’ll need

At least 18 years of age
High school diploma or GED
Valid driver’s license and a driving record that meets the standards of FSS and its insurance carrier
Basic math skills, including reading pressure gauges and performing simple calculations
Mechanical aptitude and willingness to learn how fire protection systems work
Ability to use a smartphone or tablet to complete reports
Ability to follow written and verbal instructions and to communicate clearly with coworkers and customers
Successful completion of pre-employment screening after a conditional offer of employment, which may include a background check, motor vehicle record review, and drug screen, as permitted by applicable state and local law
Regularly lift, carry, push, and pull up to 50 pounds
Ability to climb and work from ladders and lifts, including at heights
Ability to stand, walk, bend, kneel, crawl, and reach overhead for extended periods
Ability to read gauges, tags, and labels and distinguish colors
Ability to work indoors and outdoors in heat, cold, rain, snow, noise, dust, and wet conditions
Ability to work a full-time schedule that may include early starts, overtime, and occasional evening or weekend work
Some overnight travel within the FSS service territory may be required
Preferred: Experience in plumbing, pipefitting, HVAC, mechanical service, or fire protection, including military experience
Preferred: Vocational or technical school coursework
Preferred: OSHA 10-Hour Construction certification
Preferred: Experience with hand tools, ladders, and aerial or scissor lifts

Benefits

Comp & perks

Overtime paid for all hours worked as required by law
Eligibility for NICET certification premiums under the FSS program in effect at the time
Paid on-the-job and classroom training
FSS covers the cost of required training and approved certification exams, subject to FSS training and reimbursement policies
Test equipment and tools needed for the job
Required personal protective equipment (PPE)
Medical insurance
Dental insurance
Vision insurance
401(k)
Life insurance
Paid time off
Paid holidays