Thermo Systems

Mechanical Engineer

• Design control panels supporting HVAC systems, electrical power monitoring systems, switchgear interfaces, field instrumentation, networking equipment, and third-party vendor integrations within mission-critical environments
• Incorporate inputs from the Engineer of Record, MEP design packages, vendor technical submittals, network architecture documentation, project-specific design documentation, standards, and naming conventions
• Integrate submittal-based changes including points mapping, control interfaces, and vendor-specific requirements
• Complete BMS and EPMS control panel drawings to issue-for-manufacture readiness
• Perform constructability assessments of EPMS and BMS panel drawings and associated documentation
• Validate installation feasibility, cable routing, power distribution alignment, and compliance with site constraints
• Identify design risks or deficiencies and drive mitigation
• Develop points mapping, wiring requirements, and vendor schematic integrations
• Identify opportunities for design simplification, cost efficiency, or material reduction while maintaining functional and redundancy requirements
• Recommend improvements to panel architecture, wiring schemes, or component selection
• Maintain revision control and ensure timely submission of drawings and documents
• Incorporate commissioning requirements into design deliverables aligned with FAT/SAT/IST processes
• Coordinate with cross-functional teams, panel manufacturers, and vendors on scope, schedules, deliverables, technical queries, fabrication, and assembly
• Communicate with internal teams, customers, and partners
• Act as a Design & Engineering subject matter expert supporting Project and Commissioning Managers
• Support project leadership by identifying risks, resolving issues, and maintaining delivery alignment
• Adhere to company policies, QMS requirements, and safety standards
• Support and enhance the Quality Management System
• Promote structured engineering and documentation practices
• Identify process improvements and drive continuous improvement initiatives

Senior Controls Design Engineer – CAD

• Design control panels supporting HVAC systems, electrical power monitoring systems, switchgear interfaces, field instrumentation, networking equipment, and third-party vendor integrations in mission-critical environments
• Incorporate Engineer of Record, MEP design packages, vendor technical submittals, network architecture documentation, project-specific design documentation, standards, and naming conventions
• Integrate submittal-based changes, points mapping, control interfaces, and vendor-specific requirements
• Complete BMS and EPMS control panel drawings to 100% issue-for-manufacture readiness
• Perform constructability assessments, validating installation feasibility, cable routing, power distribution alignment, and site-constraint compliance
• Identify design risks or deficiencies and drive mitigation
• Develop points mapping, wiring requirements, and vendor schematic integrations
• Identify opportunities for design simplification, cost efficiency, and material reduction while maintaining functional and redundancy requirements
• Recommend improvements to panel architecture, wiring schemes, and component selection
• Maintain revision control and submit drawings and documents on time
• Incorporate commissioning requirements to support FAT/SAT/IST processes
• Coordinate scope, schedule, and deliverables with cross-functional teams
• Coordinate with panel manufacturers and vendors to resolve technical queries and support fabrication and assembly
• Communicate with internal teams, customers, and partners
• Act as a Design & Engineering subject matter expert supporting Project and Commissioning Managers
• Support project leadership with risk identification, issue resolution, and delivery alignment
• Escalate technical risks, constraints, and scope changes
• Adhere to company policies, QMS requirements, and safety standards
• Support and enhance the Quality Management System
• Promote structured engineering and documentation practices
• Identify process improvements and drive continuous improvement initiatives

Senior Controls Design Engineer, CAD

• Design control panels supporting HVAC systems, electrical power monitoring systems, switchgear interfaces, field instrumentation, networking equipment, and third-party vendor integrations in mission-critical environments
• Incorporate Engineer of Record, MEP, vendor, network architecture, project documentation, I/O list, standards, and naming-convention inputs
• Integrate submittal-based changes, points mapping, control interfaces, and vendor-specific requirements
• Complete BMS and EPMS control panel drawings to issue-for-manufacture readiness
• Perform constructability assessments and validate installation feasibility, cable routing, power distribution, site constraints, and project compliance
• Identify design risks or deficiencies and drive mitigation
• Develop points mapping and wiring requirements and integrate vendor schematics
• Identify design simplification, cost-efficiency, and material-reduction opportunities
• Recommend improvements to panel architecture, wiring schemes, and component selection
• Maintain revision control and submit drawings and documents on schedule
• Incorporate commissioning requirements for FAT/SAT/IST processes
• Coordinate scope, schedule, and deliverables with cross-functional teams
• Coordinate with panel manufacturers and vendors on technical queries, fabrication, and assembly
• Communicate with internal teams, customers, and partners
• Act as a Design & Engineering subject matter expert supporting Project and Commissioning Managers
• Support project leadership with risk identification, issue resolution, and delivery alignment
• Identify and escalate technical risks, constraints, and scope changes
• Follow company policies, QMS requirements, and safety standards
• Support and enhance the Quality Management System
• Promote structured engineering and documentation practices
• Drive continuous improvement initiatives

• Design control panels supporting HVAC systems, electrical power monitoring systems, switchgear interfaces, field instrumentation, networking equipment, and third-party vendor integrations
• Incorporate Engineer of Record, MEP, vendor, network architecture, project documentation, standards, and naming convention inputs
• Integrate submittal-based changes, points mapping, control interfaces, and vendor-specific requirements
• Complete BMS and EPMS control panel drawings to issue-for-manufacture readiness
• Perform constructability assessments and validate installation feasibility, cable routing, power distribution, site constraints, and compliance
• Identify design risks or deficiencies and drive mitigation
• Develop points mapping, wiring requirements, and vendor schematic integrations
• Identify design simplification, cost-efficiency, and material-reduction opportunities
• Recommend improvements to panel architecture, wiring schemes, and component selection
• Maintain revision control and submit drawings and documents on schedule
• Incorporate commissioning requirements into deliverables for FAT/SAT/IST processes
• Coordinate scope, schedules, and deliverables with cross-functional teams
• Coordinate with panel manufacturers and vendors on technical queries and fabrication
• Communicate with internal teams, customers, and partners
• Act as a Design & Engineering subject matter expert supporting Project and Commissioning Managers
• Support project leadership with risk identification, issue resolution, and delivery alignment
• Adhere to company policies, QMS requirements, and safety standards
• Support and enhance the Quality Management System
• Promote structured engineering and documentation practices
• Identify and drive continuous improvement initiatives

• Design control panels supporting HVAC systems, electrical power monitoring systems, switchgear interfaces, field instrumentation, networking equipment, and third-party vendor integrations in mission-critical environments
• Incorporate Engineer of Record, MEP design packages, vendor submittals, network architecture documentation, project documentation, standards, and naming conventions into designs
• Integrate submittal-based changes, points mapping, control interfaces, and vendor-specific requirements
• Complete BMS and EPMS control panel drawings from templates or partial designs to final issue-for-manufacture readiness
• Perform constructability assessments and validate installation feasibility, cable routing, power distribution alignment, and site-constraint compliance
• Identify design risks or deficiencies and drive mitigation
• Develop points mapping, wiring requirements, and vendor schematic integrations
• Identify design simplification, cost-efficiency, and material-reduction opportunities while maintaining functional and redundancy requirements
• Recommend improvements to panel architecture, wiring schemes, and component selection
• Maintain revision control and submit drawings and documents on time
• Incorporate commissioning requirements into deliverables for FAT/SAT/IST processes
• Coordinate scope, schedules, and deliverables with cross-functional teams
• Coordinate with panel manufacturers and vendors to resolve technical queries and support fabrication and assembly
• Communicate with internal teams, customers, and partners
• Act as a Design & Engineering subject matter expert supporting Project and Commissioning Managers
• Support project leadership with risk identification, issue resolution, and delivery alignment
• Identify and escalate technical risks, constraints, and scope changes
• Adhere to company policies, QMS requirements, and safety standards
• Support and enhance the Quality Management System
• Promote structured engineering and documentation practices
• Identify process improvements and drive continuous-improvement initiatives

Engineer

• Lead complex system design, including I/O design, architecture, submittals, and testing documentation
• Maintain and expand expertise through training, publications, and industry engagement
• Provide technical direction across multiple projects and teams
• Support business development through technical proposals and presentations
• Collaborate with project managers to ensure timely, accurate, and cost-effective delivery
• Mentor engineers and provide expert guidance across technical, financial, and operational domains
• Drive company design standards and quality through the QMS
• Communicate proactively and professionally with customers
• Adhere to client-specific standards and procedures
• Provide responsive problem-solving support
• Execute and oversee project tasks on schedule and within budget
• Lead full project lifecycles when assigned
• Serve as primary customer contact for assigned projects
• Identify scope changes and new business opportunities
• Delegate tasks effectively and ensure team accountability
• Accurately estimate timelines and manage project risks
• Foster a collaborative and positive team culture
• Direct and support junior staff in construction, operations, and maintenance activities as applicable

Lead Controls Engineer – Energy

• Lead complex system design, including I/O design, architecture, submittals, and testing documentation
• Maintain and expand expertise through training, publications, and industry engagement
• Provide technical direction across multiple projects and teams
• Support business development through technical proposals and presentations
• Collaborate with project managers to ensure timely, accurate, and cost-effective delivery
• Mentor engineers and provide expert guidance across technical, financial, and operational domains
• Drive company design standards and quality through the QMS
• Communicate proactively and professionally with customers
• Adhere to client-specific standards and procedures
• Deliver exceptional service and follow through on commitments
• Provide responsive problem-solving support
• Execute and oversee project tasks on schedule and within budget
• Lead full project lifecycles when assigned
• Serve as primary customer contact for assigned projects
• Identify scope changes and new business opportunities
• Delegate tasks effectively and ensure team accountability
• Accurately estimate timelines and manage project risks
• Foster a collaborative and positive team culture
• Direct and support junior staff in construction, operations, and maintenance activities as applicable

Executive

• Own delivery performance across a portfolio of complex projects, including risk, schedule, cost, margin, and customer satisfaction
• Lead, mentor, and develop Project Managers to drive consistent, high-quality execution
• Serve as the primary escalation point for critical project risks, issues, and customer concerns
• Review and approve project forecasts, cost-to-complete reports, and financial projections
• Ensure projects are delivered at or above target gross profit margins
• Provide strategic oversight on project execution, contracts, and commercial performance
• Support resource planning and staffing forecasts with engineering and business development
• Align project execution with Thermo Systems standards, QMS requirements, and strategic objectives
• Support business development through staffing alignment and customer relationship support
• Maintain executive-level relationships with customers, general contractors, and key partners
• Champion safety and quality across project teams
• Partner with engineering, operations, and business development to align delivery strategy and execution
• Communicate proactively with leadership, customers, and stakeholders
• Identify and escalate risks, constraints, and scope changes
• Drive cross-team alignment to resolve issues and maintain delivery momentum
• Ensure adherence to company policies, QMS standards, and project governance processes
• Identify and implement improvements to enhance operational efficiency and project outcomes
• Support development of project management capabilities across Thermo Systems

Senior Project Executive

Manager

• Own contracted technical scope delivery, ensuring systems are implemented and commissioned to specification
• Advise the Project Manager on staffing, commissioning strategy, and schedule constraints
• Coordinate with engineering teams to resolve technical issues and ensure deliverables support testing
• Lead field commissioning activities from pre-functional checks through final acceptance
• Direct technical resources across commissioning activities
• Oversee and execute FAT/SAT and commissioning test plans
• Serve as the primary on-site coordination point
• Drive punch list resolution and re-testing through close-out
• Ensure delivered systems meet contractual quality and performance standards
• Review and approve commissioning documentation, test reports, and turnover packages
• Maintain accurate as-built records throughout the commissioning lifecycle
• Lead commissioning documentation efforts across platforms such as CX Alloy and BIM 360
• Serve as the primary technical liaison with customer engineering and operations teams
• Lead technical reviews, demonstrations, and acceptance activities through final sign-off
• Support operational readiness, customer training, and knowledge transfer
• De-escalate priority conflicts with customers and trade partners
• Partner with the Project Manager on schedule alignment, milestone tracking, and risk mitigation
• Coordinate with the Site Manager on installation readiness and commissioning sequencing
• Provide technical status updates for project reporting and governance

Commissioning Manager

• Own contracted technical scope delivery, ensuring systems are implemented and commissioned to specification
• Advise the Project Manager on staffing, commissioning strategy, and schedule constraints
• Coordinate with engineering teams to resolve technical issues and ensure deliverables support testing
• Lead field commissioning activities and direct technical resources from pre-functional checks through final acceptance
• Oversee and execute FAT/SAT and commissioning test plans
• Serve as the primary on-site coordination point
• Drive punch list resolution and re-testing through close-out
• Ensure delivered systems meet contractual quality and performance standards
• Review and approve commissioning documentation, test reports, and turnover packages
• Maintain accurate as-built records throughout the commissioning lifecycle
• Lead commissioning documentation efforts across platforms such as CX Alloy and BIM 360
• Serve as the primary technical liaison with customer engineering and operations teams
• Lead technical reviews, demonstrations, and acceptance activities through final sign-off
• Support operational readiness, including customer training and knowledge transfer
• De-escalate priority conflicts with customers and trade partners and facilitate solutions
• Partner with the Project Manager on schedule alignment, milestone tracking, and risk mitigation
• Coordinate with the Site Manager on installation readiness and commissioning sequencing
• Provide technical status updates for project reporting and governance

• Own contracted technical scope delivery, ensuring systems are implemented and commissioned to specification
• Advise the Project Manager on staffing, commissioning strategy, and schedule constraints
• Coordinate with engineering teams to resolve technical issues and ensure deliverables support testing
• Lead field commissioning activities, directing technical resources from pre-functional checks through final acceptance
• Oversee and execute FAT/SAT and commissioning test plans
• Serve as the primary on-site coordination point
• Drive punch list resolution and re-testing through close-out
• Ensure delivered systems meet contractual quality and performance standards
• Review and approve commissioning documentation, test reports, and turnover packages
• Maintain accurate as-built records throughout the commissioning lifecycle
• Lead commissioning documentation efforts across platforms such as CX Alloy and BIM 360
• Serve as the primary technical liaison with customer engineering and operations teams
• Lead technical reviews, demonstrations, and acceptance activities through final sign-off
• Support operational readiness, including customer training and knowledge transfer
• De-escalate priority conflicts with customers and trade partners
• Partner with the Project Manager on schedule alignment, milestone tracking, and risk mitigation
• Coordinate with the Site Manager on installation readiness and commissioning sequencing
• Provide technical status updates for project reporting and governance

• Own contracted technical scope delivery, ensuring systems are implemented and commissioned to specification
• Advise the Project Manager on staffing, commissioning strategy, and schedule constraints
• Coordinate with engineering teams to resolve technical issues and ensure deliverables support testing
• Lead field commissioning activities, directing technical resources from pre-functional checks through final acceptance
• Oversee and execute FAT/SAT and commissioning test plans
• Serve as the primary on-site coordination point
• Drive punch list resolution and re-testing through close-out
• Ensure delivered systems meet contractual quality and performance standards
• Review and approve commissioning documentation, test reports, and turnover packages
• Maintain accurate as-built records throughout the commissioning lifecycle
• Lead commissioning documentation efforts across platforms such as CX Alloy and BIM 360
• Serve as the primary technical liaison with customer engineering and operations teams
• Lead technical reviews, demonstrations, and acceptance activities through final sign-off
• Support operational readiness, including customer training and knowledge transfer
• De-escalate priority conflicts with customers and trade partners and facilitate solutions
• Partner with the Project Manager on schedule alignment, milestone tracking, and risk mitigation
• Coordinate with the Site Manager on installation readiness and commissioning sequencing
• Provide technical status updates for project reporting and governance

• Lead complex control system design, including I/O design, architecture, submittals, and testing documentation
• Maintain and expand technical expertise through training, publications, and industry engagement
• Provide technical direction across multiple projects and teams
• Support business development through technical proposals and presentations
• Collaborate with project managers to ensure timely, accurate, and cost-effective delivery
• Mentor engineers and provide expert guidance across technical, financial, and operational domains
• Drive company design standards and quality through the QMS
• Communicate proactively and professionally with customers
• Adhere to client-specific standards and procedures
• Provide responsive problem-solving support
• Execute and oversee project tasks on schedule and within budget
• Lead full project lifecycles when assigned
• Serve as primary customer contact for assigned projects
• Identify scope changes and new business opportunities
• Delegate tasks effectively and ensure team accountability
• Estimate timelines accurately and manage project risks
• Foster a collaborative and positive team culture
• Direct and support junior staff in construction, operations, and maintenance activities as applicable