Inspector

• Perform pre-weld, in-process, and final inspections according to drawings, specifications, inspection plans, and procedures
• Verify products meet requirements before moving to the next operation
• Identify and contain quality issues and process deviations early
• Provide immediate feedback to Welders, Team Leaders, and Supervisors
• Verify materials, components, configurations, joint preparation, fit-up, alignment, gaps, dimensions, cleanliness, weld locations, weld sizes, and welding symbols
• Confirm the correct Welding Procedure Specification (WPS) is available and being followed
• Perform visual inspections of welded assemblies and inspect weld size, length, location, profile, continuity, and workmanship
• Identify weld defects and inspect repaired or reworked welds using weld gauges and measurement equipment
• Support additional NDT activities when required and properly qualified
• Inspect fabricated parts and welded assemblies for dimensions, tolerances, alignment, squareness, flatness, hole locations, and other characteristics
• Use calibrated calipers, micrometers, weld gauges, squares, tape measures, fixtures, and other measuring devices
• Perform final visual and dimensional inspections of completed products
• Complete inspection records and quality documentation accurately and on time
• Identify, document, tag, and segregate nonconforming material and products
• Initiate or support NCR/NCMR documentation and prevent nonconforming products from moving downstream
• Verify rework and repairs are completed correctly
• Support root-cause investigations, corrective actions, continuous improvement, and defect-reduction efforts
• Communicate recurring quality problems and trends to Production and Quality leadership
• Maintain accurate inspection records and product traceability
• Follow Quality Plans, Control Plans, inspection procedures, work instructions, and manufacturing standards
• Verify inspection equipment calibration and report damaged, inaccurate, or out-of-calibration equipment
• Support internal and external quality audits as needed
• Work closely with Welders, Team Leaders, Supervisors, Welding Engineering, Manufacturing Engineering, and Quality Engineering

Quality Weld Inspector – 2nd Shift

• Perform pre-weld, in-process, and final inspections according to drawings, specifications, inspection plans, and procedures
• Verify products meet requirements before moving to the next operation
• Identify and contain quality issues and process deviations early
• Provide immediate feedback to Welders, Team Leaders, and Supervisors
• Inspect materials, components, joint preparation, fit-up, alignment, gaps, dimensions, cleanliness, weld locations, weld sizes, and welding symbols
• Verify the correct Welding Procedure Specification (WPS) is available and followed
• Perform visual inspections of welded assemblies and identify weld defects
• Inspect repaired or reworked welds using weld gauges and measurement equipment
• Support additional NDT activities when required and qualified
• Perform dimensional inspections using calibrated calipers, micrometers, weld gauges, squares, tape measures, fixtures, and other measuring devices
• Perform final visual and dimensional inspections of completed products
• Complete inspection records and quality documentation
• Identify, document, tag, and segregate nonconforming material and products
• Initiate or support NCR/NCMR documentation
• Verify rework and repairs are completed correctly
• Support root-cause investigations, corrective actions, and continuous improvement
• Communicate recurring quality problems and trends to Production and Quality leadership
• Maintain inspection records and product traceability
• Follow Quality Plans, Control Plans, inspection procedures, work instructions, and manufacturing standards
• Verify inspection equipment calibration and report damaged or out-of-calibration equipment
• Support internal and external quality audits

• Perform pre-weld, in-process, and final inspections according to drawings, specifications, inspection plans, and procedures
• Verify products meet requirements before moving to the next operation
• Identify and contain quality issues and process deviations early
• Provide immediate feedback to Welders, Team Leaders, and Supervisors
• Inspect materials, components, joint preparation, fit-up, alignment, dimensions, weld locations, weld sizes, and welding symbols
• Confirm the correct Welding Procedure Specification (WPS) is available and being followed
• Perform visual inspections of welded assemblies and identify weld defects
• Inspect repaired or reworked welds using weld gauges and measurement equipment
• Support additional NDT activities when required and qualified
• Inspect fabricated parts and welded assemblies for dimensional compliance
• Use calibrated calipers, micrometers, weld gauges, squares, tape measures, fixtures, and other measuring devices
• Perform final visual and dimensional inspections of completed products
• Complete inspection records and quality documentation accurately and on time
• Identify, document, tag, and segregate nonconforming material and products
• Initiate or support NCR/NCMR documentation and verify rework and repairs
• Support root-cause investigations, corrective actions, and continuous improvement efforts
• Communicate recurring quality problems and trends to Production and Quality leadership
• Maintain inspection records, product traceability, and organized quality records
• Follow Quality Plans, Control Plans, inspection procedures, work instructions, and manufacturing standards
• Verify inspection equipment calibration and report damaged or out-of-calibration equipment
• Support internal and external quality audits as needed
• Work closely with Welders, Team Leaders, Supervisors, Welding Engineering, Manufacturing Engineering, and Quality Engineering

Quality Weld Inspector – 1st Shift

• Assist with in-process quality control, focusing on product coming off the personalization lines
• Continuously audit work areas to identify acceptable and rejected product within the process
• Advise production supervisors of observed non-conformities
• Maintain lot-control traceability documentation during the personalization process
• Use quality-control equipment to measure product quality
• Perform related duties as required and assigned

Quality Inspector

• Perform final inspection tasks on all switches and part orders being shipped
• Train production personnel in effective methods to control processes
• Prepare reports for all findings
• Shut down non-conforming processes after notifying the Supervisor
• Prepare and enter NCRs (Non-Conformance Reports)
• Write Customer Improvement Initiative (CII) reports for repetitive problems
• Report violations of ISO standards to the Cell Leader / Manager
• Create and implement process control charts for all critical processes with product engineering, manufacturing engineering, and production teams
• Maintain a safe and clean working environment by complying with procedures, rules, and regulations
• Conserve resources by using equipment and supplies as needed
• Train others in inspection tasks as needed
• Inspect all work prior to passing it to the next operation
• Document actions by completing production and quality forms

Production Inspector – Gas Final

• Perform final inspection tasks on all switches and part orders being shipped
• Train production personnel in effective methods to control processes
• Prepare reports for all findings
• Shut down non-conforming processes after notifying the Supervisor
• Prepare and enter NCRs (Non-Conformance Reports)
• Write Customer Improvement Initiatives (CII) for repetitive problems
• Report ISO standard violations to the Cell Leader / Manager
• Create and implement process control charts for all critical processes with product engineering, manufacturing engineering, and production teams
• Maintain a safe and clean working environment
• Conserve resources by using equipment and supplies as needed
• Train others in inspection tasks as needed
• Inspect all work prior to passing it to the next operation
• Document actions by completing production and quality forms

• Conduct regular inspections, testing, and maintenance of fire alarm and sprinkler systems in accordance with NFPA standards, local codes, and client requirements
• Identify, document, and report system deficiencies and malfunctions, including recommendations for necessary repairs or upgrades
• Ensure all systems comply with state, federal, and local fire and life safety regulations
• Communicate inspection results and maintenance needs or corrective actions to clients
• Prepare and submit detailed inspection reports, including test results, corrective actions, and code compliance issues
• Collaborate with service technicians and team members to address identified issues and ensure timely resolution
• Stay current on industry trends, codes, and regulatory changes
• Maintain up-to-date knowledge of fire alarm and sprinkler system manufacturers, models, and functionality
• Follow company safety policies and procedures and maintain a clean, organized work environment
• Travel to multiple client sites, up to 40%

Inspector jobs in Illinois

Quality Weld Inspector – 2nd Shift

Quality Weld Inspector – 2nd Shift

Quality Weld Inspector – 1st Shift

Quality Inspector

Production Inspector – Gas Final

Production Inspector – Gas Final

Fire Alarm Inspector – Life Safety