Inspector

• Work alongside and under the direct supervision of a qualified FSS inspector
• Help inspect, test, and maintain wet pipe, dry pipe, pre-action, deluge, and antifreeze sprinkler systems, standpipes, and fire pumps
• Visually inspect sprinklers, piping, hangers, bracing, control valves, gauges, fire department connections, and signage
• Help operate control valves and perform main drain, waterflow alarm, and valve supervisory switch tests
• Help perform dry pipe valve trip tests, quick-opening device tests, air supply and low-air alarm checks, and fire pump tests
• Check antifreeze concentration, spare sprinkler cabinets, gauge dates, and other NFPA 25 requirements
• Perform minor maintenance and corrective work as directed, within apprentice status and applicable licensing law
• Confirm systems may be tested with building contacts and alarm monitoring companies
• Follow impairment procedures when systems are taken out of service
• Confirm systems are restored to service, valves are open and supervised, and stakeholders are notified before leaving
• Record inspection and test results accurately in FSS forms or software, including photos of deficiencies
• Report deficiencies to the supervising inspector the same day and critical conditions immediately
• Follow FSS safety, OSHA, PPE, equipment authorization, and incident reporting procedures
• Drive a company vehicle safely between job sites
• Complete classroom, online, and on-the-job training and track training hours
• Work toward NICET Level I certification and maintain required state apprentice or trainee registration

Apprentice Fire Sprinkler Inspector

• Work alongside and under the direct supervision of a qualified FSS inspector
• Inspect, test, and maintain water-based fire protection systems in commercial, industrial, and multifamily buildings
• Help inspect and test wet pipe, dry pipe, pre-action, deluge, and antifreeze sprinkler systems, standpipes, and fire pumps
• Visually inspect sprinklers, piping, hangers, bracing, control valves, gauges, fire department connections, and signage
• Help operate control valves and perform main drain, waterflow alarm, and valve supervisory switch tests
• Help perform dry pipe valve trip tests, quick-opening device tests, air supply and low-air alarm checks, and fire pump tests
• Check antifreeze concentration, spare sprinkler cabinets, gauge dates, and other NFPA 25 requirements
• Perform minor maintenance and corrective work as directed by the supervising inspector
• Confirm with building contacts and alarm monitoring companies that systems may be tested
• Follow FSS impairment procedures when systems are taken out of service
• Confirm systems are back in service, control valves are open and supervised, and relevant parties are notified before leaving sites
• Treat customers, building occupants, and site staff courteously and respect property, schedules, and site rules
• Accurately record inspection and test results in FSS forms or software, including photos of deficiencies
• Report deficiencies to the supervising inspector the same day and immediately report conditions that could prevent system operation
• Follow the FSS Safety Program, OSHA requirements, site-specific safety rules, and PPE requirements
• Use ladders, lifts, and equipment only after receiving training and authorization
• Immediately report injuries, near misses, property damage, and vehicle incidents
• Safely drive a company vehicle between job sites in compliance with FSS policies
• Complete assigned classroom, online, and on-the-job training and track training hours
• Work toward NICET Level I certification and higher levels
• Obtain and maintain any state-required apprentice or trainee registration

• Remove cartons from the machine
• Inspect cartons to ensure they are glued and formed properly
• Pack cartons into cases and tape completed boxes closed according to manufacturing specifications
• Perform quality checks
• Pull stacks of cartons from the machine, drop stacks on a table, fan out stacks, and tap them to check for defects
• Palletize products as needed
• Perform flat packing and rework
• Check carton glue levels throughout the shift and report problems to the Glue Machine Operator/Feeder
• Assist the Glue Machine Operator and Feeder to keep the machine running
• Document QA manufacturing checks and production reporting
• Provide break relief as needed
• Keep the manufacturing area and production machine clean
• Follow GMP, safety, manufacturing, food safety, AIB, HACCP, and food defense procedures
• Perform other reasonable tasks requested by production management

Inspector jobs in Minnesota

Apprentice Fire Sprinkler Inspector

Apprentice Fire Sprinkler Inspector

Inspector Packer