Black Semiconductor

QA Automation Engineer

• Support the operation, monitoring and maintenance of the SCADA system (Siemens WinCC OA) and Siemens S7-1500 PLCs
• Participate in loop checks, tracing signals from field devices through I/O and PLCs to operator screens
• Confirm commands move valves, dampers and actuators
• Investigate and resolve alarms and faults during commissioning and live operation
• Support instrument calibration checks and field-signal troubleshooting
• Build datapoints, screens, trends and reports
• Keep documentation up to date
• Gradually take on greater system responsibility
• Collaborate with experienced colleagues, facility teams and IT teams

Junior Automation Engineer – Facilities SCADA, PLC

• Take technical ownership of the Facilities Monitoring and Control System (FMCS)
• Operate, monitor, and maintain the Siemens WinCC OA SCADA system across servers, operator stations, and displays
• Maintain and diagnose Siemens S7-1500 PLCs and remote I/O
• Adapt control logic within the existing standardized structure
• Plan and perform end-to-end loop checks
• Investigate and resolve alarms, communication faults, and unexpected equipment behavior during live operation
• Verify instrument calibration and troubleshoot analog and digital field signals
• Add datapoints, screens, trends, and reports
• Tune alarms so operators trust the system
• Maintain as-built drawings, tag lists, and change records
• Uphold change control
• Act as the technical counterpart to contractors and vendors
• Support qualification and audits with system evidence
• Extend the FMCS as the facility grows from pilot line to full production

Automation Engineer – Facilities SCADA, PLC

Engineer

• Maintain and further develop layout libraries and workflows in Synopsys
• Support designers in generating layouts for new photonic devices and circuits
• Run design rule checks (DRC) and layout-versus-schematic checks (LVS)
• Investigate and resolve DRC violations, off-grid errors, and other layout issues
• Implement new design rules
• Assemble layouts
• Support the mask flow from device layout through mask data preparation
• Help translate new designs into fabrication-ready layouts
• Contribute to new design rules and verification flows

Junior Automation Engineer – Facilities SCADA, PLC

Automation Engineer – Facilities SCADA, PLC

Layout Engineer