Mechanical Engineer

• Design, develop, integrate, and test FPGA-based processing solutions for RF and SDR systems
• Develop FPGA designs using VHDL, Verilog, and/or SystemVerilog in AMD/Xilinx Vivado
• Develop and optimize real-time digital signal-processing functions, data movement architectures, digital receivers, exciters, channelizers, and processing pipelines
• Integrate and customize AMD/Xilinx FPGA reference designs, IP cores, board support packages, and development platforms
• Develop and maintain Tcl scripts to automate Vivado project creation, design configuration, synthesis, implementation, bitstream generation, and hardware handoff workflows
• Develop and integrate embedded Linux solutions using PetaLinux, including hardware handoff, boot configuration, device trees, board-support packages, and driver integration
• Configure, integrate, and validate FPGA digital interfaces for high-speed converters, RF transceivers, memory, Ethernet, PCIe, JESD204, AXI, and other board-level peripherals
• Support FPGA board bring-up, FPGA debugging, timing closure, interface troubleshooting, hardware validation, and laboratory integration activities
• Collaborate with RF, software, systems, and hardware engineers to develop integrated system solutions
• Support architecture development, technical trade studies, and future technology roadmaps for next-generation SDR, EW, sensing, communications, and PNT systems
• Participate in customer meetings, technical reviews, demonstrations, and proposal activities
• Contribute to innovative solutions for distributed sensing, remote operation, and advanced RF processing architectures

Senior FPGA, Digital Design Engineer

• Research, plan, design, and develop mechanical products and systems
• Apply research to the planning, design, development, and testing of mechanical and electromechanical systems
• Research and analyze mechanical systems supporting Part Task Trainer component design and functionality
• Provide hardware systems engineering support for training-system evolution and integration
• Design, integrate, implement, and maintain training, engineering, and developmental test equipment suites
• Design and develop mechanical assemblies, tools, and devices for Part Task Trainer systems
• Manufacture and test mechanical components for compliance with engineering specifications and Navy training requirements
• Work on motors, actuators, thermal management, material handling, structural support, and motion systems
• Create specialized tools and fixtures for assembly, testing, and maintenance
• Perform design validation and optimization using computational analysis and simulation
• Collaborate with cross-functional engineering teams to translate training requirements into mechanical solutions for Navy systems
• Interpret data sheets and create cutouts, brackets, metalwork, 3D models, subassemblies, assemblies, and 3D-printed parts

Mechanical Engineer – Engineer Mechanical 4

• Design power utility substations using applicable codes and client standards.
• Develop general arrangements, equipment and electrical layouts, elevation views, cable trenches, grounding and conduit drawings, details, bills of materials, and AC/DC power systems.
• Design ground grids using applicable codes and industry software.
• Design lightning protection and grounding plans.
• Complete AC/DC load, bus span, and ampacity calculations.
• Create equipment and material specifications for procurement, design scopes, and cost estimates.
• Complete conceptual designs and layouts for facility planning studies.
• Prepare support documentation for procurement, construction, and operation/maintenance.
• Coordinate with multidisciplinary teams, clients, vendors, and contractors.
• Lead and participate in client meetings and job site visits.
• Ensure compliance with QA/QC processes and review and approve engineering design packages.
• Mentor and provide technical oversight to junior engineers and designers.

Principal Physical Substation Design Engineer

• Design power utility substations using applicable codes and client standards.
• Develop general arrangements, equipment and electrical layouts, elevation views, cable trenches, grounding and conduit drawings, details, bills of materials, and AC/DC power systems.
• Design ground grids using applicable codes and industry software.
• Design lightning protection and grounding plans.
• Complete AC/DC load, bus span, and ampacity calculations.
• Create equipment and material specifications, design scopes, and cost estimates.
• Complete conceptual designs and layouts for facility planning studies.
• Prepare documentation supporting procurement, construction, and system operation/maintenance.
• Coordinate with multidisciplinary teams, clients, vendors, and contractors.
• Lead client meetings and job site visits.
• Ensure compliance with QA/QC processes and review and approve engineering design packages.
• Mentor and provide technical oversight to junior engineers and designers.

Senior Physical Substation Design Engineer

• Design power utility substations using applicable codes and client standards.
• Develop general arrangements, equipment and electrical layouts, elevation views, cable trenches, grounding and conduit drawings, details, bills of materials, and AC/DC power systems.
• Design ground grids using applicable codes and industry software.
• Design lightning protection and grounding plans.
• Complete AC/DC load, bus span, and ampacity calculations.
• Create equipment and material specifications for procurement, design scopes, and cost estimates.
• Complete conceptual designs and layouts for facility planning studies.
• Prepare support documentation for procurement, construction, and system operation/maintenance.
• Coordinate with multidisciplinary teams, clients, vendors, and contractors.
• Participate in client meetings and job site visits.
• Ensure compliance with QA/QC processes, including technical review and approval of engineering design packages.
• Mentor and provide technical oversight to junior engineers and designers.

Substation Physical Design Engineer III

• Design power utility substations using applicable codes and client standards.
• Develop general arrangements, equipment and electrical layouts, elevation views, cable trenches, grounding and conduit drawings, details, bills of materials, and AC/DC power systems.
• Design ground grids using applicable codes and industry software.
• Design lightning protection and grounding plans.
• Complete AC/DC load, bus span, and ampacity calculations.
• Create equipment and material specifications for procurement, design scopes, and cost estimates.
• Complete conceptual designs and layouts for facility planning studies.
• Prepare documentation supporting procurement, construction, and system operation/maintenance.
• Coordinate with multidisciplinary engineering teams, clients, vendors, and contractors.
• Lead client meetings and job site visits.
• Ensure compliance with QA/QC processes, including technical review and approval of engineering design packages.
• Mentor and provide technical oversight to junior engineers and designers.

Lead Physical Substation Design Engineer

• Sign and seal engineering documents
• Analyze, develop, and evaluate systems
• Improve and maintain current systems or create new projects
• Design and draft blueprints
• Visit systems in the field
• Manage projects
• Apply engineering techniques and analyses within the assignment scope
• Handle complex issues with a high degree of latitude
• Provide leadership, coaching, and/or mentoring to a subordinate group
• Act as a lead or first-level supervisor when needed
• Interact directly with clients

Mechanical Engineer, PE II

• Apply standard engineering techniques to design, analyze, test, maintain, repair, or improve products, components, or assemblies
• Sign and seal engineering documents
• Analyze, develop, and evaluate systems
• Improve and maintain current systems or create new projects
• Design and draft blueprints
• Visit systems in the field
• Manage projects
• Apply engineering techniques and analyses within the scope of assignments
• Perform work with a high degree of latitude
• Handle complex issues
• Provide leadership, coaching, and/or mentoring to a subordinate group
• Act as a lead or first-level supervisor when needed
• Interact directly with clients

• Sign and seal engineering documents
• Analyze, develop, and evaluate systems
• Improve and maintain current systems or create new projects
• Design and draft blueprints
• Visit systems in the field
• Manage projects
• Apply engineering techniques and analyses within the scope of assignments
• Perform work under general supervision
• Handle complex issues and problems, referring only the most complex issues to higher-level staff

Mechanical Engineer, PE I

• Serve as the principal network authority and Lead Network Integrator for the Next Generation Environment on the IRES contract
• Drive architecture, modernization, and cross-performer technical governance of MDA’s unified digital ecosystem
• Lead a team of network engineers and interface with the Government NGE Technical Director, Government Network Design Lead, MDA leadership, and industry partners
• Establish and enforce technical baselines across Cisco Nexus Spine-Leaf EVPN-VxLAN fabrics, VMware NSX networks, Versa SD-WAN, F5 application delivery controllers, and Infoblox enterprise DDI
• Align network technical roadmaps and Interface Control Documents among government stakeholders, military leadership, and industry performers
• Translate mission capability needs into network architecture roadmaps, technical baseline decisions, and engineering trade studies
• Oversee technical assignments, design reviews, peer code/configuration audits, and engineering deliverables
• Architect scalable multi-site data center fabrics using Cisco Nexus NX-OS, Spine-Leaf topologies, and EVPN-VxLAN overlays
• Integrate VMware NSX/VCF for software-defined networking and distributed micro-segmentation
• Design enterprise load balancing, traffic distribution, SSL offloading/decryption, and high-availability application routing using F5 BIG-IP LTM/GTM/APM
• Architect WAN transport and secure branch interconnects using Versa SD-WAN/SASE, MPLS, and zero-trust edge controls
• Govern IPAM, DNS resolution, and DHCP provisioning using Infoblox DDI and hybrid-cloud orchestration pipelines
• Define network segmentation, micro-segmentation, ICAM integration, dynamic policy enforcement, and FIPS-validated cryptography
• Align designs with DoW Zero Trust Strategy, NIST SP 800-53, and DISA STIGs to support continuous ATO
• Lead Network Architecture Review Boards and Engineering Change Boards
• Establish HLDs, LLDs, ADRs, and ICDs using MBSE concepts

Mechanical Engineer jobs in Alabama

Senior FPGA, Digital Design Engineer

Mechanical Engineer – Engineer Mechanical 4

Principal Physical Substation Design Engineer

Senior Physical Substation Design Engineer

Substation Physical Design Engineer III

Lead Physical Substation Design Engineer

Mechanical Engineer, PE II

Mechanical Engineer, PE II

Mechanical Engineer, PE I

Network Design Engineer – Lead, IRES, SSFB, HSV, FBEL