Norsk Hydro

Technician

• Assist in the installation, maintenance, and basic troubleshooting of programmable logic controllers (PLCs) and related automation equipment
• Perform basic wiring, PLC, and HMI setup
• Assist in wiring and installation of PLC hardware
• Perform basic diagnostics and troubleshooting under supervision
• Read and interpret electrical schematics and PLC I/O diagrams
• Support senior technicians in system testing and commissioning
• Maintain documentation and logs of work performed
• Configure, scale, and troubleshoot analog signals and instrumentation
• Perform basic PLC program uploads, downloads, and online monitoring
• Use multimeters and basic electrical testing equipment

PLC Maintenance Technician

• Perform intermediate programming and safety configuration of PLC-controlled systems
• Independently develop, modify, and troubleshoot PLC logic using standard programming languages, including ladder logic and function block
• Install, program, and troubleshoot PLC systems in industrial environments with minimal supervision
• Troubleshoot and repair PLC-controlled systems and related components
• Integrate PLCs with HMIs, sensors, and actuators
• Collaborate with engineering teams on system upgrades and improvements
• Train junior technicians and provide technical support
• Use predictive measures to enhance equipment reliability through Continuous Reliability Improvement initiatives
• Implement and support continuous reliability improvement standards and practices
• Support mechanical technicians as needed in this multi-craft role
• Respond to equipment breakdowns and other sudden conditions requiring immediate action to restore operations

Maintenance, PLC Technician

• Perform intermediate programming and safety configuration of PLC-controlled systems
• Independently develop, modify, and troubleshoot PLC logic using standard programming languages such as ladder logic and function block
• Independently install, program, and troubleshoot PLC systems in industrial environments with minimal supervision
• Troubleshoot and repair PLC-controlled systems and related components
• Integrate PLCs with HMIs, sensors, and actuators
• Collaborate with engineering teams on system upgrades and improvements
• Train junior technicians and provide technical support
• Use predictive measures to enhance equipment reliability through Continuous Reliability Improvement initiatives
• Implement and support continuous reliability improvement standards and practices
• Support mechanical technicians as needed in this multi-craft role, approximately 30% of the time
• Respond to equipment breakdowns and suddenly developed conditions requiring immediate action to restore operations

DevOps Engineer

• Develop and oversee plant projects supporting safe, efficient, and reliable plant operations
• Lead the design, planning, coordination, and execution of capital and reliability improvement projects
• Lead a major capital project transitioning the plant from its current anodizing process to a new two-step anodizing process
• Manage a furnace modernization project focused on increasing throughput, reliability, and plant performance
• Support a safety-driven Die Shop Caustic System project
• Lead and support continuous improvement, capital, and reliability projects to increase equipment uptime, operational efficiency, and plant performance
• Collaborate with maintenance, production, engineering, corporate resources, contractors, and external vendors
• Create and maintain documentation for equipment, programs, and procedures
• Provide oversight of the Plant's Automation Program and support automation initiatives
• Provide dotted-line direction to Plant PLC Techs/Specialists, including assigning projects and reviewing progress
• Manage multiple concurrent capital projects through planning, budgeting, contractor coordination, execution, commissioning, and project closeout
• Identify equipment reliability opportunities, investigate recurring failures, and develop solutions to reduce downtime and improve operational performance

Project, Reliability Engineer

• Perform intermediate programming and safety configuration of PLC-controlled systems
• Develop, modify, and troubleshoot PLC logic using ladder logic and function block programming
• Install, program, and troubleshoot PLC systems in industrial environments with minimal supervision
• Troubleshoot and repair PLC-controlled systems and related components
• Integrate PLCs with HMIs, sensors, and actuators
• Collaborate with engineering teams on system upgrades and improvements
• Train junior technicians and provide technical support
• Use predictive measures to enhance equipment reliability through Continuous Reliability Improvement initiatives
• Implement and support continuous reliability improvement standards and practices
• Support mechanical technicians as needed in this multi-craft role, approximately 30% of the time
• Respond to equipment breakdowns and sudden conditions requiring immediate action to restore operations

Software Engineer

• Collaborate with engineers and scientists to build, modify, and test prototypes and new manufacturing processes
• Utilize PLC ladder logic as a diagnostic tool to monitor program flow and identify root causes of hardware or sequence failures
• Connect to PLC processors to observe I/O status and verify signal paths before mechanical intervention
• Lead construction of electrical panels for in-house projects in accordance with NFPA and Hydro standards
• Act as a technical escalation point for the maintenance team on complex mechanical and electrical repairs
• Work from verbal instructions, prints, sketches, and schematics
• Identify and recommend process enhancements to maximize facility efficiencies and 5S standards
• Perform other related duties to maintain workflow or respond to emergency conditions
• Adhere to company policies and procedures
• Maintain a clean and orderly work area
• Perform duties in accordance with standard methods and procedures and strict HSE, quality, and productivity requirements

Engineering Technician

QA Engineer

• Perform required testing on all welded tube material and ensure results meet required specifications and tolerances
• Perform testing within suitable timeframes to support production
• Record production test results in a computer database and create tags and labels
• Follow MRT procedures for out-of-specification material
• Disposition MRT materials under the direction of the Quality Engineer and central quality lab
• Prepare samples by cutting, marking, mounting, polishing, and grinding
• Conduct product measurements using Keyence vision measurement and optical microscopes including IM, VHX, and VR
• Perform cleanliness and tensile testing for mechanical properties
• Maintain daily calibration test records for laboratory testing equipment
• Conduct gauge repeatability and capability studies
• Support the Quality Engineer by collecting measurement data for PPAP approvals and annual dimensional layout
• Audit product characteristics and production processes for compliance with specifications and quality procedures
• Recommend processing modifications to quality improvement teams
• Write work instructions and procedures for quality program requirements
• Train employees in precision measurement techniques

QA Technician

• Ensure the reliability, maintainability, and performance of equipment, processes, utilities, facilities, control systems, and safety infrastructure
• Develop and continuously improve preventive and predictive maintenance programs
• Optimize asset performance, reduce maintenance costs, and extend equipment life in a 24/7 manufacturing environment
• Lead and support Continuous Reliability Improvement initiatives
• Increase equipment reliability, reduce downtime, improve preventive maintenance effectiveness, and drive improvements in MTBF
• Provide engineering expertise for day-to-day maintenance challenges
• Identify potential equipment failures before they impact production
• Support Total Productive Maintenance efforts
• Improve hydraulic and pneumatic system reliability
• Reduce breakdowns and delays and support safe, reliable plant operations
• Develop and refine preventive/predictive maintenance programs in coordination with equipment custodians and maintenance management
• Coordinate with planner/schedulers to ensure PM/PdM services and inspections are scheduled and performed when due
• Administer, control, and analyze equipment data, records, and histories to refine PM/PdM frequencies
• Develop engineering solutions to repetitive equipment failures and reliability problems
• Review predictive inspections, equipment histories, maintenance cost reports, failure reports, service records, and work order data
• Specify repair techniques and develop standards for major repetitive tasks
• Ensure responsible personnel are trained in programmed maintenance
• Review PM/PdM procedures with operations superintendents and staff and secure owner approval
• Analyze planned equipment idleness to develop and improve PM/PdM schedules
• Compare PM/PdM frequencies with downtime reports and equipment histories and adjust frequencies economically to avoid over-maintenance

Reliability Engineer

Analyst

• Ensure compliance with Hydro Quality system, HSE regulations, policies, and standardized operating procedures
• Take active part in incident resolution
• Work with global support teams to resolve IT infrastructure and application-related issues
• Install or participate in installation of IT infrastructure components, applications, and relevant tools
• Monitor and maintain location-specific infrastructure and applications
• Comply with area-specific customer requirements
• Participate in location-specific and global IT projects
• Maintain user accounts within locally supported applications
• Act as location representative of GBS IT professionals
• Participate in IT change management flows
• Troubleshoot IT infrastructure incidents and application errors; diagnose and solve hardware/software faults
• Maintain the location-specific part of Active Directory
• Follow global architecture, security, and operational standards and policies
• Maintain location-specific IT documentation
• Prioritize work in compliance with GBS IT Service Level Agreements

ITS Analyst

Sales

• Shape and execute the commercial strategy for the Benelux market in alignment with the Managing Director and Hydro Building Systems strategy
• Take full commercial responsibility for the region, including sales, budget, forecasts, Volume, Revenue, Margin and EBIT KPIs
• Identify and develop new business opportunities, markets and partnerships
• Strengthen, maintain and expand relationships with key customers, fabricators, building influencers, investors and strategic partners
• Lead strategic negotiations and develop long-term commercial partnerships
• Build and maintain a strong sales and project pipeline
• Lead and further develop the commercial team, creating clarity, accountability and an environment for performance and growth
• Drive Commercial Excellence by improving sales processes, customer engagement and ways of working
• Use market, customer and competitive intelligence to identify trends, opportunities and risks and translate them into commercial actions
• Develop Hydro Building Systems’ presence and reputation across the Benelux through customer engagement, industry networks, events and professional associations
• Collaborate with internal stakeholders to ensure a consistent customer experience
• Bring customer needs, market developments, regulations and competitive insights into the organisation
• Contribute to sustainability and circularity ambitions and translate them into customer and business opportunities
• Ensure compliance and responsible business conduct in commercial activities

Sales Director

Operator

• Set up and operate MPE CTL Department equipment within production goals and standard setup times
• Manually sort MPE tubing
• Change and set prescribed tooling to suit tubing size
• Set arc and pressure and make continued adjustments for material variations
• Use equipment required by the job function
• Change and adjust blades as required
• Use jib cranes or overhead cranes to position coils on the pay-off
• Use electric pallet jacks to maneuver spools
• Set up and operate cutting equipment, clamping jaws, guards, and stops
• Work to production orders, packing specifications, and instructions
• Select proper packing materials based on product specifications and packing requirements
• Prepare packaging materials, including pre-making boxes, stocking bins with filler, pre-cutting paper, and preparing totes/pallets

Machine Operator

• Set up and operate MPE CTL Department equipment within production goals and standard setup times
• Manually sort MPE tubing
• Change and set prescribed tooling to suit tubing size
• Set arc and pressure and make continued adjustments for material variations
• Use equipment required by the job function
• Change and adjust blades as required
• Use a jib crane or overhead crane to position coils on the pay-off
• Use electric pallet jacks to maneuver spools
• Set up and operate cutting equipment, clamping jaws, guards and stops
• Work to production orders, packing specifications and instructions
• Select proper packing material based on product specifications and packing requirements
• Prepare packaging materials, including pre-making boxes, stocking bins with filler, pre-cutting paper and preparing totes/pallets

• Work from maintenance work orders, schedules, manuals, checklists, prints, sketches and schematics in accordance with national and local codes and standards
• Fabricate, repair, install and maintain equipment using hand tools, instruments, machining equipment, cutting and welding equipment, and drilling, boring and grinding tools
• Maintain strict quality standards and tolerances using measuring devices and tools
• Perform hydraulic, pneumatic, gas plumbing and piping operations
• Install and repair hydraulic and pneumatic cylinders, fittings, couplings, pumps, motors, valves, regulators, pipes, tubing and hoses
• Install, diagnose, maintain and repair gas-fired ovens, burners and related regulation and control devices
• Align, level and balance machinery, pumps, motors and associated equipment
• Assist control engineers with control-system repairs, diagnosis, teardown, parts replacement and testing
• Diagnose equipment issues and perform necessary repairs
• Prepare material requisition forms and maintenance paperwork; report spare-parts shortages to the team leader
• Participate in meetings and task-force groups to coordinate activities, communicate issues, obtain approvals and resolve problems
• Perform equipment validations and safety and quality audits
• Perform other related duties and respond to emergency conditions
• Adhere to company policies and procedures
• Maintain a clean and orderly work area according to 5S standards
• Perform duties in accordance with HSE, quality and productivity requirements

Maintenance Technician

Engineer

• Develop and oversee plant projects supporting safe, efficient, and reliable plant operations
• Oversee the plant’s automation program
• Design, plan, coordinate, and schedule projects improving plant capabilities, reliability, and returns
• Work with Maintenance, Operations, Corporate resources, contractors, and external vendors
• Design or modify mechanical and control systems for new or existing equipment
• Direct controls engineers in building machine control software for proper machine operation
• Lead and support continuous improvement projects to increase automation efficiency and uptime
• Collaborate with maintenance, production, and engineering teams on automation upgrades and maintenance programs
• Create and maintain documentation for equipment, programs, and procedures
• Ensure awareness and compliance with Health & Safety objectives and PPE standards
• Attend required training
• Assign projects to Plant PLC Technicians/Specialists, provide direction, and review progress in cooperation with the Maintenance Supervisor

Automation Project Engineer

Product Development

• Support the organization of new construction product development activities
• Provide support for projects
• Assist with schedule management
• Monitor practical testing and product approval processes
• Monitor tests conducted at laboratories accredited by INMETRO
• Follow up with suppliers regarding new projects

PLC Maintenance Technician

Maintenance, PLC Technician

Maintenance, PLC Technician

Project, Reliability Engineer

Maintenance, PLC Technician

Engineering Technician

QA Technician

Reliability Engineer

ITS Analyst

Sales Director

Machine Operator

Machine Operator

Maintenance Technician

Automation Project Engineer

Product Development Intern