Kennametal

Operator

• Run grinding machines to produce quality products according to blueprint specifications
• Set up grinding machines and install, change, and dress grinding wheels where applicable
• Determine stock removal while working within tolerances
• Gauge inserts to ensure proper dimensions
• Scope inserts to verify visual characteristics
• Pull samples and record inspection results on route cards
• Place inserts into proper trays and move them to the next operation
• Separate scrap from good inserts and document accurately
• Scan correct production information
• Operate other equipment as needed
• Train new operators when required
• Troubleshoot basic to moderate machine problems
• Follow safety procedures and operating procedures/work instructions
• Process products according to inspection control plans, routings, specifications, quantities, and styles
• Meet daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Run orders by due date and solve routine problems using learned knowledge of insert styles and production processes

Manufacturing Machine Operator I – 3rd Shift

• Operate PVD coating furnaces to coat carbide and Cermet inserts
• Load and unload product fixtures into furnaces
• Set up product correctly and ensure it is sufficiently clean
• Enter product weights, desired coating cycle information, and related data into a computer
• Start and monitor coating processes
• Clean fixtures and base plates between heats
• Ensure adequate gas supply and replace gas tanks as needed
• Ensure targets and melts are adequate for the loaded process
• Test standards to verify coating thickness and adhesion are within specifications
• Perform batch cleanings at proper intervals
• Operate other equipment, including parts blaster, as needed
• Set up and separate product
• Keep the work area and equipment clean
• Follow safety procedures, operating procedures, work instructions, inspection control plans, product routings, specifications, and quantity/style requirements
• Work to meet daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Notify supervisors of deviations from operating procedures and solve furnace-related problems by consulting supervisors and co-workers

Manufacturing Chemical Process Operator II

• Load and unload furnaces
• Monitor computerized controls for temperatures, pressures, chemical flow rates, and gas flow rates
• Perform and document furnace operations
• Conduct vacuum leak checks and periodic preventative maintenance
• Troubleshoot furnace problems
• Rebuild or replace furnace components as needed
• Ensure adequate gas and chemical levels according to procedures
• Replace tanks as needed
• Set up and separate product
• Enter quality data by furnace and heat results
• Monitor graph results
• Act as Emergency Responder within the Coating Department
• Follow safety procedures and inspection control plans
• Ensure products are processed according to routings, specifications, quantities, and styles
• Work to meet daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Interpret available data to report and correct furnace problems
• Notify the supervisor of deviations from operating procedures

Manufacturing Chemical Process Operator III

Technician

• Support and maintain CNC Grinders, Presses, Sintering furnaces, Wet and Dry media blasters, CVD Furnaces, PVD Furnaces, and the facility
• Install, troubleshoot, repair, and upgrade mechanical, electrical, pneumatic, and hydraulic systems
• Conduct daily preventative maintenance (PMs)
• Work alongside plant personnel and independently
• Gather and analyze information, apply learned skills and critical reasoning, and solve moderate to complex problems
• Participate in plant spill response and emergency SCBA response activities

Manufacturing Maintenance Technician – 3rd shift

• Run multiple machines producing quality products to blueprint specifications
• Set up and operate multiple machines
• Use computer-controlled setup through HMI to adjust programs or machines
• Load and off-load product from multiple machines
• Gage products to ensure proper dimensions
• Scope products to verify visual characteristics and defects
• Check product samples using assigned inspection tools and record results according to process standards
• Place products into appropriate racks
• Separate scrap from good product and document accurately
• Scan correct production information
• Maintain tooling used in machines
• Train new operators when required
• Troubleshoot moderate to complex quality and machine issues
• Follow safety procedures and process documents
• Work to meet daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Run orders by due date and escalate recurring problems and major decisions to the supervisor

CNC Operator I – 2nd Shift

• Set up, run, train, and troubleshoot all Post-Coat Wetblast manual and automated machines
• Load and unload carbide inserts into the automated wetblast machine
• Confirm incoming inserts and count them
• Set up orders using the appropriate program, process, and trays
• Run machines in automated or manual mode
• Observe and verify inserts are processed to standard
• Scope inserts to verify visual characteristics
• Determine blast success based on visual appearance
• Adjust blaster machine pressures and times as needed
• Monitor machine processes
• Scan correct information
• Perform CLI and preventative maintenance during shifts, weekly, and monthly according to guidelines
• Handle deviations according to operating procedures and work instructions
• Work to meet daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Run orders by due date and follow control plans
• Solve routine problems using knowledge of insert styles, production processes, and machine familiarity; escalate recurring problems and decisions to the supervisor

Manufacturing Machine Operator II – 1st Shift

General

• Lead and drive KMT’s EHS strategy, culture, and compliance for the Bangalore KIL manufacturing facility
• Lead and drive EHS performance and compliance, and develop and implement systems and standards across the KIL business
• Develop and execute EHS strategy implementation plans aligned with KMT strategic objectives
• Implement and sustain EHS management systems, regulatory programs, and processes
• Lead Kennametal’s Fatality and Serious Injury prevention strategy by managing processes to recognize, identify, and control critical hazards and risks, including lock/tag/verify, powered industrial vehicles, cranes, machine guarding, and electrical safety
• Collaborate across operations and leadership
• Lead and manage environmental compliance and sustainability initiatives, including critical environmental operating permits
• Implement KMT global EHS standards across locations
• Lead complex EHS capital investment projects to improve EHS programs, compliance, and fatality and serious injury prevention
• Lead and manage the industrial hygiene program, sampling, and data analysis
• Work and collaborate with local authorities such as the KSPCB, DOF, and other governing bodies

EHS Specialist – India

• Fulfill orders through order entry, administration, and shipping via computer or system
• Prepare orders for shipment by verifying identifying information and quantities
• Assemble boxes and pack items, or assemble wooden crates for large merchandise
• Enclose correct paperwork with shipments
• Cover receiving duties by receiving shipments, checking items, delivering them to the correct person or department, and maintaining storage of received material
• Perform SAP and KIS shipping transactions
• Process shipments through an online logistics broker
• Perform cycle counts
• Process international shipments and occasionally prepare manual customs documents
• Notify the supervisor of partial shipments and other discrepancies
• Handle return shipments
• Follow shipping/receiving documentation and control plans
• Meet daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Perform other duties as directed by the supervisor

Shipping/Receiving Operator – Entry

• Perform maintenance functions on CNC equipment, manual lathes and grinders using relay logic
• Maintain plant support equipment, including compressors, pumps, and cooling tower/heat exchanger systems
• Perform plant and equipment preventive maintenance
• Prepare work areas by identifying and addressing safety issues before proceeding
• Diagnose and repair production equipment
• Clean up the area after performing maintenance functions
• Diagnose and repair plant support equipment

Senior Maintenance Technician

• Operate PVD coating furnaces to coat carbide and Cermet inserts
• Load and unload product fixtures into furnaces
• Set up product correctly and ensure it is sufficiently clean
• Enter product weights, coating cycle information, and related data into a computer
• Start and monitor the coating process
• Clean fixtures and base plates between heats
• Ensure adequate gas supply and replace gas tanks as needed
• Ensure targets and melts are adequate for the loaded process
• Test standards to verify coating thickness and adhesion meet specifications
• Perform batch cleanings at required intervals
• Operate parts blaster and other equipment as needed
• Set up and separate product
• Keep the work area and equipment clean
• Follow safety procedures and inspection control plans
• Process product according to routings and specifications
• Meet daily departmental production goals
• Notify supervisors of deviations from operating procedures
• Solve furnace-related problems using learned knowledge, reasoning, and consultation with supervisors and co-workers
• Communicate safety, quality, and product issues across shifts

PVD Furnace Operator

QA Engineer

• Independently manage the quality of main products and maintain effective operation of the quality system
• Lead resolution and improvement of quality problems for related products
• Assist the quality manager in implementing the quality strategy
• Research and plan product control schemes and control the entire production process to ensure final products meet drawing requirements
• Handle external customer complaints and achieve corresponding quality objectives
• Form multifunctional teams to improve specific customer complaints
• Use statistical data and effective methods to improve process capability and quality problems
• Lead improvement of major quality problems to achieve quality objectives
• Maintain quality system operation and propose reasonable improvement plans
• Monitor engineering changes and supervise departments' compliance with process requirements
• Manage introduction processes for new products, equipment, and technology using APQP and PPAP
• Research testing technologies and improve testing accuracy and efficiency
• Collaborate with the technical center and competence team on advanced testing technology
• Provide training to the team and assist others in developing quality skills

Senior Engineer, Quality

• Operate manufacturing equipment as a Production Operator
• Work the Monday–Friday 7:30 AM–3:30 PM shift schedule
• Work required shift rotations, Saturdays, and all shifts as needed
• Progress to higher skill levels within a reasonable period of time

Operator, Manufacturing

• 工作内容按岗位标准化操作流程，按质、按量地完成本岗位的生产任务。
• 按厂区、岗位安全规则作业，确保无安全事故，能按工厂要求每财年完成2个Find&Fix。
• 按5S标准，确保负责区域5S符合标准。
• 知道本岗位的设备原理，能简单排查本岗位的设备故障。
• 知道自主维护概念，并能使用润滑技能，对本岗位的设备进行润滑自主维护。
• 能识别本岗位的不合格品，并能按不合格品处理流程进行处理。

Lead Braze Operator

• 按岗位标准化操作流程，按质、按量地完成本岗位的生产任务。
• 按厂区、岗位安全规则作业，确保无安全事故，能按工厂要求每财年完成2个Find&Fix。
• 按5S标准，确保负责区域5S符合标准。
• 知道本岗位的设备原理，能简单排查本岗位的设备故障。
• 知道自主维护概念，并能使用润滑技能，对本岗位的设备进行润滑自主维护。
• 能识别本岗位的不合格品，并能按不合格品处理流程进行处理。

Braze Operator I – Experienced

Night Shift

• Build heats for Innova, Cemecon, and Mega PVD furnaces using Automated Calvary Machines and/or manually rodding surface preparation and washing of inserts
• Perform routine and daily preventive-maintenance cleaning of machines
• Diagnose and read machine errors or faults related to PVD rod loading
• Troubleshoot and adjust robotics and controls to correct problems quickly
• Gather and verify setup and raw materials against route cards
• Verify product and style match the route card
• Follow standard operating procedures to complete orders
• Maintain production for automated rod loading and unloading
• Complete production records and required system data entry
• Sustain 5S + 1 standards through housekeeping and staging fixtures
• Follow safety procedures and verify safety devices, machine guarding, and signage before production
• Perform quality inspection and quantity verification of incoming product before coating
• Load work-in-process into the room to keep furnaces loaded
• Move WIP based on priority, backorder, and dead fish
• Originate documentation accompanying heats through the coating process
• Visually inspect coated carbide inserts with the unaided eye and microscope
• Transfer inserts to the next work center
• Communicate pertinent information to oncoming shifts
• Operate other equipment as needed
• Follow inspection control plans and proper routings, specifications, quantities, and styles
• Meet daily departmental production goals and minimize machine downtime
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Support co-workers and substitute for manual processes when necessary
• Run orders by due date and use Insert Defect Criteria to determine product acceptance or rejection