ENFRA

General

• Provide complete project field leadership and direction for day-to-day operations in partnership with the Project Manager
• Coordinate vendors and subcontractors to install scopes according to Contract Documents and Project Schedule
• Maintain overall job site safety, logistics, cleanliness, and professionalism
• Implement the Site-Specific Safety Plan and lead project safety meetings
• Manage job site logistics, conditions, and incident investigations
• Create, maintain, update, and accurately report the Project Schedule
• Monitor schedule logic, develop recovery plans, and lead pull planning efforts
• Coordinate site construction activities and mitigate project constraints
• Oversee the Site Quality Assurance Plan and trade partner contract compliance
• Schedule and attend inspections with authorities having jurisdiction, third-party inspectors, and clients
• Coordinate installation between trades and drive trade partner progress
• Attend jobsite meetings, schedule deliveries, document site activities, coordinate progress, assist with inspections, review vendor/subcontractor invoices, and prepare status reports
• Collaborate with inter-company field leadership to drive efficiencies and best practices
• Author and monitor Daily Reports
• Process and review submittals for timely material procurement
• Implement the Project Quality Assurance Plan and resolve deficiencies
• Attend project update meetings and communicate project health and progress
• Measure and report project progress
• Monitor Energy Savings targets and coordinate with Measurement & Verification and Engineering teams
• Ensure legal, permit, and regulatory compliance and manage permit closeout
• Document existing site conditions and interface with facility operators
• Coordinate start-up and commissioning activities
• Promote and maintain company culture with office and field stakeholders

Superintendent – Large Commercial Construction

Electrical Engineer

• Sign and seal engineering documents, as applicable
• Design solar energy, battery energy storage, fuel cell, and combined heat and power plants with guidance from senior engineers
• Analyze and design electrical systems, including power distribution, low/medium voltage systems, lighting, and controls
• Perform utility interconnect, arc flash, short-circuit, and breaker coordination calculations
• Prepare calculations, drawings, and specifications under established standards
• Conduct site visits, field assessments, and data collection
• Coordinate and plan 3D laser scanning efforts as needed
• Assist with multidisciplinary project coordination
• Apply engineering techniques within defined assignments under general supervision
• Handle moderately complex issues and escalate complex challenges to senior staff
• Develop client interaction skills in supported settings
• Maintain design documentation and support permitting and procurement efforts for energy and infrastructure projects

Electrical Engineer, PE I

Project Manager

• Oversee implementation aspects of delivery projects and ensure safe, quality outcomes meeting or exceeding company commitments
• Maintain a safe and secure work environment through site planning, safety plan review, JHA approvals, toolbox talks, and site walks
• Assist the Senior Project Manager and Construction Manager in ensuring project scope, code, and project requirements are met
• Coordinate management of GMP, Lump Sum, or Concession Agreement contracts and project budgets
• Manage contract requirements including bonds, insurance, notifications, schedules, reporting, costs, and energy savings requirements
• Set up and manage Procore for change management and document control
• Negotiate and prepare vendor purchase orders and subcontracts
• Participate in development hand-off meetings and establish project goals and client expectations
• Establish site utilization plans, baseline schedules, project schedules of values, and quality assurance plans
• Prepare monthly project reports and cost reviews
• Lead change management from RFI affect letters, drawing revisions, and client directives through resolution
• Lead project meetings and document agendas and minutes
• Maintain project schedules, mitigate issues, and manage risk log items
• Build customer relationships with subcontractors, vendors, and clients
• Participate in industry organizations and community opportunities
• Manage and develop Assistant Project Managers

Mechanical Engineer

• Sign and seal engineering documents and oversee technical quality
• Lead the design and execution of complex mechanical systems and large-scale projects
• Develop detailed system configurations and control schemes emphasizing long-term energy savings
• Establish engineering approaches, design standards, and best practices
• Provide technical oversight and review junior staff work
• Manage discipline scope, schedules, and project budgets
• Supervise field investigation and site visit planning
• Review plans for 3D laser scanning efforts
• Coordinate with clients, stakeholders, and external partners
• Work independently with broad authority
• Resolve highly complex technical and project challenges
• Mentor and develop junior engineers and designers
• Support client relationships through technical input, proposals, and client engagement
• Conduct field surveys, document existing conditions, and observe construction progress at job sites

Mechanical Engineer, PE III

• Sign and seal engineering documents and oversee technical quality
• Lead the design and execution of complex mechanical systems and large-scale projects
• Develop detailed system configurations and control schemes focused on long-term energy savings
• Establish engineering approaches, design standards, and best practices
• Provide technical oversight and review junior staff work
• Manage discipline scope, schedules, and budgets
• Supervise field investigations and site visits, including reviewing plans for 3D laser scanning
• Coordinate with clients, stakeholders, and external partners
• Resolve complex technical and project challenges
• Mentor and develop junior engineers and designers
• Support existing client relationships through technical input, proposals, and client engagement
• Deliver HVAC, hydronic, and thermal plant systems for hospital and college campuses
• Conduct field surveys to document existing conditions and observe construction progress

• Sign and seal engineering documents, as applicable
• Design solar energy, battery energy storage, fuel cell, and combined heat and power plants with guidance from senior engineers
• Analyze and design electrical systems, including power distribution, low/medium voltage systems, lighting, and controls
• Perform calculations for utility interconnects, arc flash, short-circuit, and breaker coordination studies
• Prepare calculations, drawings, and specifications under established standards
• Conduct site visits, field assessments, and data collection
• Coordinate and plan 3D laser scanning efforts when needed
• Assist with project coordination across multidisciplinary teams
• Apply engineering techniques within defined assignments
• Work under general supervision
• Handle moderately complex issues and escalate complex challenges to senior staff
• Support permitting and procurement efforts
• Maintain design documentation and respond to field conditions
• Contribute to performance, reliability, and energy-efficiency objectives within ENFRA's design-build delivery model

• Sign and seal engineering documents, as applicable
• Analyze, design, and evaluate mechanical systems, including HVAC, hydronic, and energy systems
• Prepare calculations, drawings, and specifications under established standards
• Assist with detailed system configurations and control schemes focused on long-term energy savings
• Conduct field investigations and support site visits
• Coordinate and plan 3D laser scanning efforts
• Assist in project execution and coordinate with internal teams
• Apply engineering techniques within defined assignments
• Work under general supervision
• Handle moderately complex issues and escalate more complex problems to senior staff
• Develop client interaction skills in supported settings
• Collaborate with multidisciplinary teams on energy and infrastructure projects for hospital and college campuses
• Support permitting and procurement efforts and respond to field conditions
• Maintain design documentation and contribute to performance, reliability, and energy-efficiency objectives

Mechanical Engineer, PE I

• Sign and seal engineering documents
• Lead design and analysis of mechanical systems for projects of moderate complexity
• Develop calculations, drawings, and technical specifications
• Improve existing systems and support development of new solutions
• Prepare detailed system configurations and control schemes focused on long-term energy savings
• Conduct field investigations and support site visits
• Coordinate and plan 3D laser scanning efforts
• Coordinate with internal disciplines and support construction-phase activities
• Resolve complex technical issues independently
• Provide informal mentorship to junior engineers and designers
• Interface directly with clients on technical matters
• Act as task lead or discipline lead on projects when needed
• Design and coordinate HVAC, hydronic, and thermal plant systems for energy and infrastructure projects across hospital and college campuses
• Support permitting and procurement and address field conditions
• Produce accurate calculations and documentation delivering performance, reliability, and energy efficiency objectives

Mechanical Engineer, PE II

• Sign and seal engineering documents, as applicable
• Analyze, design, and evaluate mechanical systems including HVAC, hydronic, and energy systems
• Prepare calculations, drawings, and specifications under established standards
• Create detailed system configurations and control schemes focused on long-term energy savings
• Conduct field investigations and support site visits
• Coordinate and plan 3D laser scanning efforts
• Support project execution and coordinate with internal teams
• Apply engineering techniques within defined assignments
• Handle moderately complex issues and escalate complex problems to senior staff
• Develop client interaction skills in a supported setting
• Document existing conditions and observe construction progress at job sites

• Serve as a senior technical leader for complex mechanical systems in hospital and college campus energy and infrastructure projects
• Sign and seal engineering documents and oversee technical quality
• Lead the design and execution of complex mechanical systems and large-scale projects
• Develop detailed system configurations and control schemes focused on long-term energy savings
• Establish engineering approaches, design standards, and best practices
• Provide technical oversight and review junior staff work
• Manage discipline scope, schedules, and project budgets
• Supervise field investigations and site visits; review plans for 3D laser scanning
• Coordinate with clients, stakeholders, and external partners
• Resolve complex technical and project challenges independently
• Mentor and develop junior engineers and designers
• Support client relationships through technical input, proposals, and client engagement
• Conduct field surveys to document existing conditions and observe construction progress

• Serve as a senior technical leader for complex electrical systems supporting hospital and college campus energy and infrastructure projects
• Sign and seal engineering documents and ensure quality standards
• Lead and review designs for solar energy, battery energy storage, fuel cell, and combined heat and power plants
• Perform and review utility interconnect, arc flash, short-circuit, and breaker coordination calculations
• Manage electrical scope, including schedules, budgets, and deliverables
• Supervise planning for field investigations and site visits
• Review plans for 3D laser scanning efforts as needed
• Resolve highly complex technical and coordination challenges
• Provide technical oversight and review of junior staff work
• Work independently with broad authority
• Mentor and develop junior engineers and designers
• Coordinate with clients, utilities, and external stakeholders
• Support existing client relationships through technical input, proposals, and client engagement
• Conduct field surveys, document existing conditions, and observe construction progress

Electrical Engineer, PE III

• Provide overall direction for field installation of assigned projects
• Maintain direct responsibility for field labor, labor coordination, quality control, and safety
• Represent the company on the project site
• Ensure installation functions as designed and satisfies contracted scope
• Attend and contribute to project meetings
• Perform plan-reading, coordination, layout, sketching, and material take-offs
• Order, receive, place, and return materials, tools, and equipment
• Confirm construction drawings and specifications agree with contract scope
• Respond to general contractor requests concerning scope limits
• Coordinate trades stacking and phasing and influence project scheduling
• Manage manpower loading and maintain the two-week look-ahead schedule
• Complete timekeeping and administrative duties, including daily reports, submittal logs, and RFI status
• Ensure safety and other company programs are implemented and effective
• Ensure building code compliance
• Forecast labor and material costs with the project team
• Perform quality control

Sheet Metal Superintendent

Operations

• Lead on-site mechanical field operations across an assigned data center project, building, or campus
• Translate the Director, Data Center's execution strategy into safe, coordinated, and predictable field performance
• Lead General Superintendents and Superintendents and align manpower, planning, materials, equipment, logistics, quality, and installation sequencing
• Reinforce a safety-first culture and ensure compliance with ENFRA policies, customer requirements, OSHA standards, and site-specific plans
• Own installation sequencing, phase planning, short-interval planning, constraint removal, and two-week look-ahead schedules
• Develop and maintain manpower plans, including staffing forecasts, onboarding, badging, background checks, drug screening, and site access
• Coordinate materials, equipment, tools, prefabrication, vendors, and field supervision
• Oversee site logistics, deliveries, unloading, storage, material handling, hoisting, equipment access, inspections, and trade coordination
• Establish field-management processes, communication routines, reporting expectations, and accountability
• Ensure installations comply with contract documents, submittals, drawings, manufacturer requirements, applicable codes, and quality standards
• Monitor productivity, labor performance, schedule progress, rework, constraints, and execution risks; drive corrective or recovery plans
• Identify scope changes, customer impacts, trade interference, delays, and potential change events; document field conditions
• Coordinate and hold subcontractors accountable for safety, schedule, quality, manpower, logistics, and contractual requirements
• Maintain relationships with customers, General Contractors, Owners, design partners, vendors, subcontractors, and other trades
• Participate in project reviews and operating meetings, reporting on safety, manpower, schedule, materials, productivity, quality, risks, and decisions
• Coordinate readiness for testing, start-up, pre-commissioning, commissioning, punch-list completion, turnover, and closeout
• Mentor and develop field leaders and identify succession, capability, and training needs

Data Center Operations Manager – Mechanical/Plumbing

• Provide overall direction for field installation of assigned projects
• Take direct responsibility for field labor, labor coordination, quality control, and safety
• Represent the company on the project site
• Ensure installation functions as designed and satisfies the contracted scope
• Attend and contribute to project meetings
• Perform plan-reading, coordination, layout, sketching, and material take-offs
• Order, receive, place, and return materials, tools, and equipment
• Confirm construction drawings and specifications agree with contract scope
• Respond to general contractor requests concerning scope limits
• Coordinate trade stacking and phasing and influence project scheduling
• Load manpower and maintain the two-week look-ahead schedule
• Complete timekeeping and administrative duties, including daily reports, submittal logs, and RFI status
• Ensure safety and company programs are implemented and effective
• Ensure building code compliance
• Forecast labor and material costs with the project team
• Maintain quality control

• Sign and seal engineering documents, as applicable
• Design solar energy, battery energy storage, fuel cell, and combined heat and power plants with guidance from senior engineers
• Analyze and design electrical systems, including power distribution, low/medium voltage systems, lighting, and controls
• Perform basic utility interconnect, arc flash, short-circuit, and breaker coordination calculations
• Prepare calculations, drawings, and specifications under established standards
• Conduct site visits, field assessments, and data collection
• Coordinate and plan 3D laser scanning efforts as needed
• Assist with multidisciplinary project coordination
• Apply engineering techniques within defined assignments
• Work under general supervision
• Handle moderately complex issues and escalate complex challenges to senior staff
• Conduct field surveys, travel to job sites, document existing conditions, and observe construction progress
• Develop code-compliant, constructible designs supporting performance, reliability, and energy-efficiency objectives for hospital and college campus infrastructure projects