GE Vernova

Sales Engineer

• Act as the engineering interface to Sales, Project Delivery, and Commercial Operations teams during proposal phases
• Provide technical support involving design, production, availability, and performance of GEH reactor designs
• Develop and maintain customer-facing materials, including Virtual Reality materials for the BWRX-300
• Standardize commercial offerings and technical strategies for global BWRX-300 deployment
• Work with Regulatory Affairs on local regulations, codes, standards, and implementation strategies
• Advise on Division of Responsibilities, cost estimates, project schedules, site walk-downs, siting studies, and plant arrangements
• Lead ITO-to-OTR handover to project implementation teams after contract awards
• Represent GVH Advanced Nuclear at customer meetings and competitive bidding processes
• Attend internal project meetings and customer negotiations
• Interpret customer requirements to determine proper application of GEH equipment
• Support productivity and quality initiatives
• Ensure on-time completion of assigned proposal activities and business initiatives
• Develop technical capabilities alongside position responsibilities
• Identify and communicate project schedule or requirements issues early enough for resolution

Senior Application Engineer – Sales Engineer

Product Designer

• Lead extended-scope controls engineering projects from kick-off through hardware design, software development, commissioning, and commercial plant operation
• Support requisition, design, structuring, validation, and commissioning of control systems for gas turbines, bottoming cycle systems (HRSG and ST), and balance of plant
• Compile project-level controls strategy and document requirements
• Lead design and implementation of controls system projects across GT, ST, HRSG, BOP, and electrical systems
• Make independent project-level decisions and own high-risk, complex projects from ITO to COD
• Support ITO and proposal efforts
• Work and lead in an Agile software methodology
• Support and influence product requirements definition
• Lead global control system requirements definition and management
• Drive architecture, top-level design, verification, validation, and commissioning requirements
• Define and manage system function, performance, interface, reliability, maintainability, and safety requirements
• Support and influence test plans, software acceptance tests, site pre-operation, startup, and commissioning
• Coordinate internal and external customer requirements and task flow-down
• Partner with Project Managers on baseline master schedules and cost roll-ups
• Lead customer discussions and reviews
• Promote consistent controls solutions
• Lead fulfillment teams with an inclusive and adaptable style
• Collaborate with GE groups and external customers
• Manage controls cost and schedule targets with functional managers
• Communicate clearly with the team and business leaders

Senior Plant Controls Engineer – Global Design Leader

• Lead extended-scope controls engineering projects from kick-off through hardware design, software development, commissioning, and commercial plant operation
• Support requisition, design, structuring, validation, and commissioning of control systems for gas turbines, bottoming cycle systems (HRSG and steam turbine), and balance of plant
• Compile project-level controls strategies and document requirements
• Lead design and implementation of controls system projects
• Make independent project-level decisions and own high-risk complex projects from ITO to COD
• Support ITO and proposal efforts
• Work and lead in an Agile software methodology
• Support and influence product requirements definition
• Lead global control system requirements definition and management
• Drive architecture, top-level design, verification, validation, and commissioning requirements
• Define and manage system function, performance, interface, reliability, maintainability, and safety requirements
• Support and influence test plans, software acceptance tests, site pre-operation, startup, and commissioning
• Coordinate internal and external customer requirements and task flow-down
• Partner with Project Managers on project baseline master schedules and cost roll-ups
• Lead customer discussions and reviews
• Drive consistent solutions across gas turbine, steam turbine, HRSG, BOP, and electrical controls
• Lead fulfillment teams with an inclusive and adaptable style
• Collaborate with internal GE groups and external customers
• Manage controls cost and schedule targets with functional managers
• Communicate clearly with teams and business leaders

General

• Perform on-site commissioning services for new transformer installation, corrective maintenance, and unit upgrades
• Assist team leaders with on-site resources, assigned crew members, and subcontracted services
• Attend daily morning tailboards with crew members and/or customer resources to outline daily activities
• Identify and report EHS/HSE concerns associated with job scope
• Assist with operation and control of vacuum processing rigs and associated equipment
• Assist with or oversee field testing or commissioning of associated units
• Participate in developing and improving standard procedures for transformer installation and maintenance service
• Provide technical assistance in preparing and submitting technical documents
• Participate in developing inspection criteria with external and internal customers for transformer services
• Travel regionally and nationally across North America
• Support emergency call-out services for customers’ year-round 24x7 production requirements

Power Transformer Commissioning Specialist

Procurement

• Provides pre and post contract support, including contract administration, terms & conditions, claims management, risk modeling, and contract estimating for tenders and project reviews
• Supports departmental operations and executes professional activities with some autonomy within established policies for Oumache
• Responsible for the profitability and customer satisfaction for assigned contracts
• Provides service agreement and time and material program management
• Assists in sales campaigns for new contracts and proposals
• Ensures timely resolution of customer issues and customer satisfaction for assigned contracts
• Interacts with customer service, parts & transactional services, field service, repair service and other teams
• Acts as liaison between internal organizations and customers for assigned contracts
• Manages staffing and performance development
• Leads small projects and supports team consensus and performance expectations

Lead Services Specialist – Customer Contract Management

Proposal Manager

• Lead and manage the overall ITO (Inquiry to Order) process for large and complex proposals within the SEMEA region
• Review enquiry documents and establish winning strategies with the extended Proposal Team
• Develop proposal plans, lead proposal reviews, and monitor and report proposal progress
• Identify deviations or issues, propose mitigation actions, and implement corrective actions
• Coordinate with application engineering, engineering, finance, legal, services, supply chain, project management, product management, and other subject matter experts
• Identify and address commercial triggers during contract negotiations and drafting
• Lead risk analysis, cash curve, purchasing and contract scheme, terms and conditions, and commercial proposal preparation
• Ensure proposal cost estimates align with scope, strategy, provisions, and contingencies
• Review and redline contractual terms and draft contracts with Legal, Comfin, and Operations teams
• Prepare complete, high-quality, timely commercial proposals
• Ensure adherence to ITO and risk processes and obtain and record proposal approvals
• Lead proposal reviews and ensure risk triggers, mitigation, and business risk acceptance levels are addressed
• Lead and attend customer meetings and prepare clarifications, answers, and presentations
• Lead commercial negotiations with customers and supporting functions
• Develop and maintain customer and regional relationships
• Ensure seamless handover from proposal phase to execution after award
• Manage commercial and contractual documentation and conduct comprehensive handover meetings
• Prepare order acknowledgements, obtain contract signatures, own the booking process, and ensure compliance
• Drive implementation of proposal standards and new commercial models
• Improve proposal processes and tools, emphasizing Lean opportunities, waste reduction, and ITO efficiency
• Maintain knowledge of market trends, customer requirements, competitor actions, and customer base
• Support the business in maintaining high compliance and integrity
• Report to the SEMEA Commercial Operations and Risk Leader

Senior Commercial Proposal Manager

QA Automation Engineer

• Report to the Control & Protection Engineering Manager
• Deliver the overall technical solution meeting customer requirements
• Capture and analyze customer requirements
• Define control system architecture for HVDC projects
• Build and update project signal lists
• Define control test strategies
• Define detailed test plans and procedures and execute, lead, or supervise test execution
• Develop SCADA/HMI systems
• Lead and support Factory Acceptance Tests (FAT)
• Collaborate with project managers, technical experts, site teams, and other stakeholders
• Interface with equipment suppliers, monitor cabinet manufacturing, and supervise FATs
• Investigate technical problems and establish procedures and corrective actions
• Assist with control-system installation and commissioning site activities
• Prepare responses to customer comments on technical submittals
• Attend technical meetings with customers, contractors, and consultants
• Follow standard design practices, engineering reviews, and guidelines
• Apply engineering policies and procedures
• Support department continuous-improvement activities

Lead AC Control Automation Engineer

Analyst

• Analyze labor, materials, subcontractor, overhead, and other operating costs to identify trends, variances, and improvement opportunities
• Build and maintain cost models, dashboards, and savings trackers
• Support the development of cost-out business cases with data and financial analysis
• Track initiative performance, validate savings, and report progress against targets
• Work with operation execution, fulfillment, finance, engineering, Product Line, and other functions to gather data and confirm assumptions
• Develop deep-dive analysis across value streams at fleet level, including Repairs, Rotables, Engines, and OFS, to identify cost drivers and trends
• Identify areas of overspend, inefficiency, or leakage
• Prepare regular management reporting and executive summaries
• Support forecasting, budgeting, and scenario analysis for cost reduction initiatives
• Ensure data quality and consistency in cost reporting
• Assist with benchmarking and comparative analysis across sites, teams, or service lines
• Support the Aero Cost Leader by analyzing spend, identifying savings opportunities, tracking cost-out initiatives, and providing financial insights
• Help ensure savings opportunities are visible, measurable, and tracked through realization

Aero Cost Analyst – m/f/d

Systems Engineer

• Drive technical project activities and lead customer kick-off meetings
• Ensure successful project execution from design through commissioning
• Participate in project risk reviews
• Manage project engineering budgets in terms of allocated man-days
• Provide regular project progress updates
• Analyze customer specifications
• Write project technical documentation
• Validate technical solutions with customers
• Specify software and IEDs
• Manage technical execution planning
• Ensure adherence to GE Vernova safety standards
• Address technical deviations and manage fault reports
• Support site engineers remotely or on-site
• Lead Factory Acceptance Tests and Site Acceptance Tests
• Coordinate with commissioning teams for major site milestones
• Provide project-specific customer training
• Support tendering and commercial teams
• Coordinate with cross-functional teams, customers, suppliers, and subcontractors to ensure timely design delivery
• Monitor and control project design budgets and implement the design change process
• Supervise and coordinate engineering activities performed in-house or by suppliers/subcontractors
• Ensure compliance with project technical specifications and defined scope

Lead Engineer – Systems Engineering

• Oversee the overall technical solution that meets customer requirements
• Capture requirements and perform gap analysis
• Define schematic diagram requirements for control and protection systems
• Produce detailed design documentation, drawings, test specifications, and test reports
• Prepare substation single-line diagrams, protection single-line diagrams, protection lists, and specifications
• Clarify specifications and refine technical solutions with customers
• Prepare principal diagrams covering interlockings, protection actions, polarities, and HVDC-specific functions
• Monitor manufacture of control and protection cabinets and supervise factory tests
• Follow standard design practices, engineering reviews, and guidelines
• Prepare technical specifications for cabling and fiber optics, cable lists, and cable schedules
• Interface with equipment suppliers and review in-house and external contractor designs and engineering data
• Ensure design projects are undertaken by competent personnel and subcontractors, reviewing designs created by others
• Investigate technical problems and establish corrective procedures and actions
• Prepare bills of material for LV equipment
• Prepare responses to customer comments on technical submittals with project management
• Attend technical meetings with customers, contractors, and consultants
• Prepare design calculations, including load lists, power consumption, and heat dissipation
• Define control panel requirements and produce detailed control-system design documentation using standard design blocks
• Produce panel electrical schematics, wire/cable schedules, routine test specifications, general assembly drawings, and bills of materials
• Oversee control-system testing and FAT witnessing
• Assist site installation and commissioning activities
• Share engineering information and promote open dialogue
• Ensure proper documentation of technical data for assigned projects and tasks

Secondary System Engineer

Electrical Engineer

• Design and analyze electrical components applicable to LV, MV and HV systems across the Generator and Electrical product portfolio
• Create design documentation, including single line diagrams, wiring and elementary drawings, loop diagrams, specifications, layouts, and other arrangement drawings
• Serve as the Lead Design Engineer or Lead Electrical Engineer on new build projects and act as the Single Point of Contact for the electrical engineering scope
• Prepare functional specifications for electrical components, electrical interconnections, and interface documents based on sizing studies, contractual requirements, regulatory codes and standards, and reference designs
• Lead and support new vendor qualification activities in collaboration with GEV Sourcing
• Perform and support Root Cause Analysis and develop Corrective and Preventive Actions to improve product reliability, quality, and performance
• Support supplier design evaluations and technical assessment and disposition of supplier offers
• Collaborate with cross-functional teams to interpret and develop Single Line Diagrams, wiring, loop, instrumentation, and schematic diagrams
• Apply electrical design principles to adapt and improve overall system design
• Take technical ownership of electrical hardware and systems
• Support project execution and process improvement with cross-functional teams
• Participate in peer and design reviews and collaborate with key stakeholders and global engineering sites to solve complex engineering problems
• Comply with R&D processes and local codes and standards, manage project milestones, and seek peer validation
• Support tendering and bidding activities through engineering calculations, technical assessments, and recommendations
• Embrace LEAN principles and drive continuous improvement initiatives

• Provide day-to-day EHS direct support for sites, warehouses, service sites, field technicians, managers, contractors, and staff within the defined scope
• Serve as first-line contact for field service engineers on day-to-day EHS issues in service work
• Interpret applicable laws, regulations, procedures, and local/national EHS standards
• Prepare and review EHS documentation for products and processes
• Ensure customer EHS requirements are followed for GE Vernova employees and contractors
• Update, support, develop, and implement site procedures
• Review emergency plans and ensure materials, equipment, testing, and training are in place
• Train personnel on laws, regulations, procedures, and risk mitigation
• Support Site Managers with EHS program implementation
• Ensure emergency drills are conducted at least quarterly
• Verify equipment and tools meet internal safety standards and follow up contractor and team mobilizations
• Provide EHS site support and assessments during major operations
• Conduct audits, legal and documentation compliance reviews, and site inspections
• Manage regulatory-agency site inspections and required EHS documentation
• Oversee PPE management for staff and visitors
• Support contractor mobilization and MCE/Blades teams on regional wind farms
• Implement and maintain compliance applications including Gensuite, Comply Works, and SGS
• Review reporting systems, responsibilities, deadlines, and event closure
• Represent GE Vernova in local EHS working groups and wind regional communities
• Promote Zero Harm culture and identify trends and potential risks
• Ensure incidents are reported, investigated, classified, and managed according to requirements
• Support accident and incident investigations, root-cause analysis, injury relatedness and recordability assessments
• Implement initiatives to reduce injuries and support safer equipment and tools
• Develop and implement the yearly training and learning plan
• Liaise with contractors, medical services, emergency services, regulatory agencies, and customers on EHS matters
• Advise management on unsafe acts and conditions and follow up with field technicians at least biweekly
• Provide input for site EHS goals and objectives and meet regularly with site managers
• Coach, mentor, and train local management and safety leaders
• Support the Region EHS Manager and Service Director in regional decision-making
• Conduct EHS training and awareness sessions and facilitate periodic EHS meetings
• Share best practices across sites and ensure risk assessments/JSA are communicated before tasks begin
• Advise site managers on EHS strategy, regulatory changes, and performance improvement
• Follow up and communicate local EHS metrics
• Align local EHS activities with GE Vernova’s safety vision and regional EHS action plans

EHS Specialist

• Drive technical project activities and lead customer kick-off meetings
• Ensure successful project execution from design through commissioning
• Participate in project risk reviews
• Manage engineering budgets in terms of allocated man-days
• Provide regular project progress updates
• Analyze customer specifications
• Write project technical documentation
• Validate technical solutions with customers
• Specify software and IEDs
• Manage technical execution planning
• Ensure adherence to GE Vernova safety standards
• Address technical deviations and manage fault reports
• Support site engineers remotely or on-site
• Lead Factory Acceptance Tests and Site Acceptance Tests
• Coordinate with commissioning teams for major site milestones
• Provide project-specific customer training
• Support tendering and commercial teams
• Coordinate with cross-functional teams, customers, suppliers, and subcontractors
• Monitor and control project design budgets
• Implement the design change process
• Supervise and coordinate engineering activities
• Ensure compliance with project technical specifications and defined scope
• Ensure timely and efficient design delivery and customer satisfaction

• Provide pre- and post-contract support, including contract administration, terms and conditions, claims management, risk modeling, and contract estimating for tenders and project reviews
• Support departmental operations and execute professional activities with some autonomy within established policies for Oumache
• Manage profitability and customer satisfaction for assigned contracts
• Provide service agreement and time-and-material program management
• Assist in sales campaigns for new contracts and proposals
• Ensure timely resolution of customer issues and customer satisfaction for assigned contracts
• Interact with customer service, parts and transactional services, field service, repair service, and other teams
• Act as liaison between internal organizations and customers for assigned contracts
• Manage people directly, including staffing and performance development
• Execute policy and strategy using technical knowledge, analytical thinking, and technical experience
• Propose solutions for complicated manufacturing processes with technical variety and/or interdependent production cycles
• Serve as a resource for less-experienced colleagues
• Lead small projects with low risks and resource requirements
• Explain information and develop skills to bring team members to consensus
• Convey performance expectations and handle sensitive issues

• Analyze labor, materials, subcontractor, overhead, and other operating costs to identify trends, variances, and improvement opportunities
• Build and maintain cost models, dashboards, and savings trackers
• Support cost-out business cases with data and financial analysis
• Track initiative performance, validate savings, and report progress against targets
• Work with operations execution, fulfillment, finance, engineering, Product Line, and other functions to gather data and confirm assumptions
• Develop deep-dive analysis across value streams at fleet level, including Repairs, Rotables, Engines, and OFS
• Identify overspend, inefficiency, and leakage
• Prepare regular management reporting and executive summaries
• Support forecasting, budgeting, and scenario analysis for cost reduction initiatives
• Ensure data quality and consistency in cost reporting
• Assist with benchmarking and comparative analysis across sites, teams, or service lines
• Support the Aero Cost Leader by turning data into action and ensuring savings opportunities are visible, measurable, and tracked through realization